Please read carefully. By accessing or using LMT.Pro tools, you confirm that you have read, understood, and agreed to these Terms and Conditions. If you do not agree, you must not use the platform.
LMT.Pro is a professional engineering software platform providing computational tools to support preliminary design and planning in the lifting, methods, and temporary works engineering fields. The platform is operated under the name LMT.Pro.
By using any LMT.Pro tool — including but not limited to Lifting Commandor, Crane Working Platforms, Haul Roads, Protection Slabs, Scaffolding, and Falsework — you agree to be bound by these Terms and Conditions and our Privacy Policy.
These terms apply to all users, including Appointed Persons (AP), Temporary Works Designers (TWD), Temporary Works Coordinators (TWC), Site Engineers, and all other construction professionals.
The outputs generated by LMT.Pro tools are provided as a computational aid for preliminary engineering assessment only. All results, calculations, drawings, and documents produced by this platform must be independently reviewed and validated by the responsible engineer before use on any project.
LMT.Pro accepts no liability for decisions made on the basis of unverified outputs. The platform does not replace the professional judgement of a competent engineer.
These tools are intended for use by competent persons including Appointed Persons (AP), Temporary Works Designers (TWD), Temporary Works Coordinators (TWC), Site Engineers, and other qualified construction professionals. The user remains solely responsible for ensuring all outputs comply with applicable standards, site-specific conditions, statutory requirements, and contractual obligations.
Outputs from LMT.Pro do not constitute a certified, signed, or approved engineering document unless independently verified and formally issued by a suitably qualified engineer.
LMT.Pro tools may be used for:
You must not use LMT.Pro to:
All software, algorithms, design logic, templates, report formats, and content on LMT.Pro are the intellectual property of LMT.Pro. No part of the platform may be reproduced, distributed, or used commercially without prior written consent.
Engineering outputs (calculation reports, DXF drawings, lifting plans) generated by the tools are provided for your use in accordance with Section 4 above.
LMT.Pro tools reference published engineering standards including but not limited to EN 13000, ISO 4305, BS 5975, TWf2019:02, BR470, TG20:13, BS EN 12811-1, BS 7121, CDM 2015, LOLER 1998, and the Eurocodes. References to these standards are for guidance only.
The user is solely responsible for ensuring that the applicable version of any standard is used and that all local, regional, and project-specific requirements are satisfied.
During the founding access period, LMT.Pro tools are made available at no charge. LMT.Pro reserves the right to introduce commercial pricing at any time with reasonable advance notice to registered users. Founding access does not constitute a contractual commitment to any specific pricing structure.
To the maximum extent permitted by applicable law:
Use of LMT.Pro is subject to our Privacy Policy, which explains how we collect, use, and protect your data in accordance with UK GDPR.
These Terms and Conditions are governed by and construed in accordance with the laws of England and Wales. Any disputes arising from use of the platform shall be subject to the exclusive jurisdiction of the courts of England and Wales.
LMT.Pro reserves the right to update these Terms and Conditions. Material changes will be communicated via the platform. Continued use of the platform following notification of changes constitutes acceptance of the revised terms.
For any queries relating to these Terms and Conditions, please use the contact form on our website.